Springs

Filters

Filters

Now Shopping by

Length 230mm Remove

Clear All

Filter Options

Price

€30.00 - €39.991 item
€40.00 and above22item

Shape

Barrel4item
Straight8item
Taper11item

Spring rate

4kg/mm4item
5kg/mm2item
5.5kg/mm1 item
6kg/mm3item
7kg/mm2item
7.5kg/mm1 item
8kg/mm2item
9kg/mm1 item
10kg/mm2item
11kg/mm1 item
12kg/mm1 item
14kg/mm1 item
16kg/mm1 item
2.5kg/mm1 item

Internal diameter

62mm22item
72mm1 item
97mm3item
98mm1 item
99mm1 item
100mm4item
82mm1 item

Click here for ASP (Adjustable Spring Platform) options

View as Grid List

23 Items

Sort By Set Descending Direction

How do I know which springs are on my kit?

FIND OUT

The springs have their details printed on them in the following formats:

Straight and barrel springs: Example 62.180.008

62 = internal diameter in mm
180 = spring length in mm
008 = spring rate in kg per mm

Taper springs: Example 100.62.230.005

100 = internal diameter one end in mm
62 = internal diameter the other end in mm
230 = length in mm
005 = spring rate in kg per mm

BC 7KG TAPER SPRING 98.62.230.007V

0060384

€50.81 €41.99

BC 6KG TAPER SPRING 100.62.230.006V OEM REAR RUBBER TOP MOUNT IMPREZA GD

0032715

€50.82 €42.00

BC 7.5KG BARREL SPRING 62.230.007.5S

0060472

€50.81 €41.99

BC 5KG TAPER SPRING 100.62.230.005V OEM REAR RUBBER TOP MOUNT IMPREZA GD

0007251

€50.82 €42.00

BC 4KG TAPER SPRING 100.62.230.004V OEM REAR RUBBER TOP MOUNT IMPREZA GD

0007252

€50.82 €42.00

BC 4KG TAPER SPRING 62.62.230.004V

0025567

€50.81 €41.99

BC 14KG TAPER SPRING 100.99.230.014V

0025857

€50.81 €41.99

BC 5KG BARREL SPRING 62.230.005S

0035195

€50.81 €41.99

BC 5.5KG STRAIGHT SPRING 62.230.005.5

0026105

€50.81 €41.99

BC 4KG BARREL SPRING 62.230.004S

0007892

€50.81 €41.99

BC 8KG TAPER SPRING 62.97.230.008V

0004999

€50.81 €41.99

BC 6KG TAPER SPRING 62.97.230.006V

0005060

€50.81 €41.99

BC 12KG STRAIGHT SPRING 62.230.012

0008793

€50.81 €41.99

BC 4KG STRAIGHT SPRING 62.230.004

0022827

€50.81 €41.99

BC 10KG TAPER SPRING 62.97.230.010V

0032804

€50.81 €41.99

BC 11KG TAPER SPRING 72.62.230.011V

0033615

€50.81 €41.99

BC 8KG STRAIGHT SPRING 62.230.008

0060273

€50.81 €41.99

BC 6KG STRAIGHT SPRING 62.230.006

0090132

€50.81 €41.99

BC 16KG TAPER SPRING 62.82.230.016V

0009957

€42.34 €34.99

BC 7KG STRAIGHT SPRING 62.230.007

0090282

€50.81 €41.99

BC 10KG STRAIGHT SPRING 62.230.010

0080453

€50.81 €41.99

BC 2.5KG BARREL SPRING 62.230.002.5S

0029764

€50.81 €41.99

BC 9KG STRAIGHT SPRING 62.230.009

0026442

€50.81 €41.99

Show

per page

open

True Rear Coilovers

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

open

Noise Transmission

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RN kit will not come with any top mounts as it is designed specifically to re-use the OEM top mount components.

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

open

Attention

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

open

The RM, HM and ZR Series are comprised of a damper cartridge secured within a threaded outer body. This specific design requires a lubricating grease to be applied during the assembly process between the two damper and threaded body to avoid metal to metal contact. In order to keep the two components from touching each other and so generating noise transmission you will need to periodically clean out the old grease and apply new grease.

This is a simple process that can be done with just a few common tools. It does not require you to open the internals of the dampers themselves and therefore you do not need to have the dampers re-pressurised after carrying out this procedure. Please contact us on [email protected] for more information and a step-by-step guide on how to complete this maintenance.

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

open

Notice

PLEASE NOTE THIS COILOVER KIT WILL ONLY FIT THE WIDE ARCH E82 1M COUPE WITH THE 3.0 STRAIGHT 6 TURBO ENGINE.

IF YOU DO NOT HAVE THIS MODEL THEN PLEASE REFER TO THE MENU OPTION ‘BMW 1 SERIES E81/E87 EXCL 1M COUPE

I understand

open

Attention

Before you can continue, you must agree to all of following terms

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

I agree to the noise transmission terms and conditions

In a very small number of applications the RH front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts may cause noise transmission on this specific application. If potential noise could be a concern for you, please be aware of this before proceeding.

Please also note that there is currently no known solution or alternative for this application, and the RA kit with pillowball top mounts is the only available option.

I agree to the noise transmission terms and conditions

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on the 996 and 986 kits. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any 996 or 986 kits as faulty due noise transmission. This does not affect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

For transporter T6 panel van FWD long wheelbase.
Not for vehicles with 500+KG load in rear

I understand

AIRMATIC MUST CHANGE REAR LOWER ARM

Rear arm needs replacing with the Mercedes rear lower control arm from the E350 W211.

I understand

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

I agree to the terms and conditions

This RA/DA kit is designed for performance-focused builds and requires minor chassis modification, including cutting the front upper mounting area to ensure proper fitment.

Please contact us at [email protected] to receive full installation instructions. We strongly recommend reviewing this document before purchasing to ensure it meets your requirements.

If you prefer a direct bolt-on option, please choose the RN/DN version, which is engineered to work with OEM front upper mounts for easier installation.

I agree to the terms and conditions